Showing posts with label stain. Show all posts
Showing posts with label stain. Show all posts

Sunday, December 17, 2017

DIY Wooden Lantern

The past few weeks have been super busy but I know a number of people have asked me about the decorative wooden lanterns I built recently so I wanted to share a quick post about them.   There are a number of different tutorials for variations of these lanterns which is what I shamelessly copied (like this one, this one, or this one) so it's certainly not my original idea, but I thought I'd just share how I built mine. :)

I decided to build two different sizes.  The larger one uses basic off-the-shelf lumber so is really easy to construct as they're all simple straight cuts on a miter saw.   I actually went through my scrap pile and used a lot of the smaller pieces I had so didn't have to buy anything for this project!  For the smaller size, I had to use my table saw and Microjig Gripper to rip the lumber down to much smaller widths before making the final cuts with my miter saw. 

I made sure to construct the lanterns so they are open at the top.  This allows me to use a real candle which I love the look of.



Measuring 7-1/2" wide x 17-3/4" tall, I'll show you how I created my large lantern.  The height of this particular lantern can be adjusted just by changing the length of the vertical 2x2's.  



(Mini lantern is 5" wide x 10" tall)



The following instructions are for the large lantern, but I have included the cut list for the mini lantern as well. 

Lumber List:




Tools:
Miter saw
Kreg Jig (optional)
Drill & screwdriver or brad nailer
Wood Glue
Stain or paint



I've include all the measurements I used for the mini lantern in brackets.


Step 1:
To create the base, glue the 7-1/2" 1x3's together.   (5" - 1x3's)




Step 2:
Construct the two sides of the lantern with the 4-1/2" & 14" 2x2's.   (3-1/2" & 7-1/2" - 3/4"x 3/4")






Step 3:
Glue one lantern side to the base. I used my Kreg Jig and had drilled a single pocket hole in the end of each vertical 2x2, but using a nailer or a screw through the bottom of the base and up into the vertical 2x2 also works well.



Step 4:

Glue and nail the remaining 4-1/2" 2x2's (3-1/2" - 3/4"x 3/4") to form the front and back.


 Step 5:

Glue and nail the 2nd previously constructed side.




Step 6:

Glue the 3/4" 2x2 feet (3/4" - 3/4"x 3/4") to the bottom corners.  You could add a nail but I found the glue alone was adequate enough to hold them.



Step 7:

Glue and nail on the top of the lantern frame using the 4-1/2" & 7-1/2" 1x2's (3" & 5"  1"x 5/8")


Step 8:

Add the top of the lantern by gluing the remaining 4-1/2" & 6" 1x2's ( 3" & 4"  1" x 5/8") on their edge along the top flush to the inside edge. 




A couple tips:

Cutting as you go:  Because your 1x3's may not be EXACTLY 2-1/2" in width, you can adjust the lengths of the short horizontal 2x2's to match the base width before gluing it all in place.




I chose to sand and stain all my pieces before assembling it.  I found it so much easier to achieve a consistent stain colour without having to attempt to stain the tighter corners. :)

For my mini lantern, I constructed it the same way but only used glue and a few small pin nails.

I ended up building two of the mini lanterns and will be adding a glass holder and pillar candle in each to give them to my daughters teachers as Christmas gifts.  I think it would be simple to dress these up as centerpieces on a dining or console table.

There are so many ways to dress these lanterns up and customize them for your own home.  Definitely let me know if you have any questions and I would love to see your lanterns if you decide to build one!

Happy Building!

Cristina










Thursday, December 7, 2017

12 Days of a DIY Christmas Rustic Moose



Hello!  Welcome to Day 7 of the 12 Days of a DIY Christmas series.   I am so excited to be participating again and to team up with such an amazing group of talented women!

When I was first asked to participate, a few project ideas come to mind but I finally decided on this one.  I’d come across this adorable little rustic moose on Pinterest and loved him immediately but the link didn’t lead anywhere so I decided to just recreate my own. 

I decided to take it a step further and add some mini cup hooks to his antlers to make it a sweet little advent calendar....because honesty, anytime I can add chocolate to the mix, I will! ;)  I chose to sew the little treat bags but if sewing isn’t your thing, you could pop into a local dollar or hobby store and they usually carry little bags that would also work.  Of course, he’s just as cute on his own as well. ;)
                                    ______________________________________________________

Let’s get building!  This project is actually fairly simple and should go together quickly.
I started by sketching out a very basic outline for the pieces needed.  I’ve drawn them out on 8-1/2” x 11” paper so you can easily print them full size at home.  The antler pattern will just need to be taped together to make one continuous piece.   You can grab them as a pdf HERE or I've included the jpegs below which you should be able to click and then "save as" to your computer and then print full size.



 
I anticipated I may be making a few of these little guys, so I actually traced and cut out a template from some scrap 1/8” plywood I had in my lumber stash to make my patterns a little more stable for repeated use.  

I purchased a 6’ - 1x10 pine board, but if you’re only making one moose, you can actually squeeze it out of 3’ if you snug up the pattern pieces.  Be sure to lay the flat portion of the antlers along the edge of the board so you can use the leftover piece above it for the base (I didn’t draw a pattern for that piece). 




I cut out my main pieces with my band saw, but a jig saw or even a scroll saw would also work.  After cutting out the pattern pieces, you should be left with an approximate 4" x 18” piece that can be cut down for the base.  I chose to cut it to 14” long with my miter saw and then rip it down to 3-5/8” wide on my table saw.  

Once the pieces were cut out, I sanded them down to soften and smooth the edges.  If you have a router, you could certainly get fancy and use a round over bit along all the edges, but I’m sticking to the rustic look so just sanded it down enough to knock down any sharp edges.


I stained my pieces with Minwax English Chestnut except for the antlers which I stained with Minwax Jacobean.  I made the mistake of not using a pre-stain this time and regretted it – pine tends to absorb stain unevenly and sure enough it ended up a bit blotchy.  Oops.  


I chose to assemble it before finishing it with a clear coat.  I centered and attached the bottom edge of the body on the base piece with a little glue and then added a couple countersunk screws through the bottom. 






 I then attached the head and antlers in the same way through the back.   


For the hooks, I purchased these little ½” brass cup hooks from our local Home Depot. 



To add the hooks, I drilled a shallow pilot hole in the antlers so it was easier to start each hook before topping it all with Minwax satin Wipe-on poly.    


Once dry, I screwed in the cup hooks and painted on the eyes with some black and white craft paint and added a nose with a small red pompom.  With the addition of a bow at his neck and the little treat bags (simple tutorial below!), this project is complete!  I’m absolutely thrilled with how it turned out.










Another option is to skip the body and base and just use the head and antlers.  With a couple simple saw tooth hangers on the back, it could easily be hung on a wall to keep it within easy reach but out of the way!


If you’re interested in sewing your own little treat bags, this is what I did.   I had some leftover neutral fabric in my craft room and just wanted to use what I had, but this would be adorable using a Christmas light weight cotton fabric as well! 

Each finished bag is approx. 2-1/4” x 4”.  

For each bag, start with a piece of fabric 3” x 10”.  Fold over the short sides by 1” and sew 3/4” (ish) from the top edge. (I took this pic before actually stitching the fabric so added a digital "stitch" as a reference.




Fold the fabric in half right sides together to form the bag and sew a 3/8” seam top to bottom along ONE side. 


You’ll want to do the same on the other side as well, but before sewing it up, fold a piece of 14” ribbon in half and with the ribbon “tails” inside the bag, sandwich the folded ribbon between the two pieces of fabric with approximately a 3/4” loop outside the bag.  This loop will be used to hang the bag on the hook. 






Sew up the side seam making sure the ribbon tails are pulled out of the way.  When you turn the bag right side out, the loop should be on the inside and the ribbon tails should be on the outside. 




 I chose to also add a number to each bag using a rubber stamp set and some black ink but that’s optional.  



Fill with your treat of choice, pull the loop up through the top of the bag and close the bag by wrapping the ribbon tails around the bag and tying a bow.  Hang the bag on the hook with the loop and you're done!   



We're just over half way through the 12 Days of a DIY Christmas series.  Definitely take a peek at the gorgeous projects that have been posted so far!  Mindi from My Love 2 Create is up next!!  Looking forward to seeing her project!

Here's the list again of the talented women participating again this year.  Click the links for the free tutorial and plans from each builder!

December 1:  Her Tool Belt

December 2:  Woodshop Diaries

December 3:  Build It Craft It Love It

December 4:  The Kim Six Fix

December 5:  Anika’s DIY Life

December 6:  The Handyman’s Daughter

December 7:  The Painted Key

December 8:  My Love to Create

December 9:  Hazel & Gold Designs

December 10: The Created Home

December 11: Uncookie Cutter

December 12: Handmade with Ashley















Thursday, February 23, 2017

Hidden Storage Cabinet

Hi guys! 

I'm so excited to share this recent project I just finished.  If you've been following me on Facebook or Instagram you will have already been seeing a few sneak peeks of the progress.  If not, I'm so glad you're here to see it now!


I had a lot of leftover pine in my shop after a few past projects (I tend to overbuy so I don't run out) and thought this would be a great way to use some of it up.  I'm a huge fan of chalkboards and after building my daughter a HUGE chalkboard for Christmas, (I guess I should blog about that project too!) I had a lot of chalkboard paint leftover as well, so thought I'd add that to mix. ;)

So this is the final result.  How cute is this?!  It would be great in a kitchen, hall, or really anywhere in the house. 



A simple little drawer on the bottom is a great spot to hide the chalk!







What makes this cabinet really unique though is that it's actually got HIDDEN storage!  Ready for this?





How awesome is that?!  The perfect spot to tuck away any extra house keys, jewelry or other small items you'd like to keep out of sight.  


I've posted a quick video of how it works.



And I just had another thought!  If you're like me with a growing Essential Oils collection, how awesome would it be to modify the slide out a little and store all your oils in it! 

I had a lot of fun building this piece and anticipate I'll be building a few more in my future.

Thanks for popping by!

Cristina


Tuesday, December 6, 2016

13 Days of a Woodworker Christmas - Sliding Lego Table






Hi guys!  Welcome to Day 6 of the 13 Days of a Woodworker Christmas!  I am so excited to be participating  and am thrilled to have you stop by! This is my very first written tutorial and video share, so if you have any questions, please let me know!

While this particular tutorial isn’t for a Christmas specific project, it could make a pretty awesome gift for any of the little ones in your life!  At first glance it may seem like any other child’s table and chair set, but what I think makes this one unique is that rather than dealing with any bulky heavy drawers or table tops that have to be removed, this table top is on full extension drawer slides and caster wheels and easily glides out of the way to access the storage below.  And because it’s supported by its own legs, there’s no worry about  little ones tipping it over! 
I’ve referred to this as a Lego table after I built my first one a few years ago for my boys to store their crazy amounts of Lego.  But of course, it’s certainly not limited to that!  It would work so well for trains, crafts, art supplies or spontaneous tea parties!

To make the build as clear as possible, I’ve included instructions here, printable instructions and cut layouts to take to your shop, AND a couple of build videos just in case you need a little more clarification.

EDITED:  Just thought I'd quickly clarify that the table base actually stays stationary while the table top slides.  This allows the little ones to open the table even if it's loaded up with lots of toys that would be too heavy for them to move if it was in a drawer. :)

Click here to download a PDF cut layout and full build plans


Let’s get started!

Sliding Table

Shopping List:

1 - 4x8 – ¾” plywood or MDF

2 – 2x2 @ 8’  -  I like to use spruce or pine

Iron on Edge Banding

Pair of full extension drawer slides – I’m using 27” slides

Pair of 1-1/2” ridged caster wheels

Pocket hole plugs

1-1/4” pocket hole screws




Cut List:

Plywood: 

(1)  5-1/2” x 27” (Table base front)

(1)  5-1/2” x 27” (Table base back)

(2)  5-1/2” x 29-1/2” (Table base sides)

*(1)  28-1/2” x 31” (Table base bottom)*

(1)  36” x 36” (Sliding table top)

*(1)  6” x 31” (Sliding table top front)*

(2)  6” x 32-1/2” (Sliding table top sides)


*Please Note:  These two pieces should be cut to their finished size after the main portion of the table is built as your measurements may differ slightly from what I’ve listed depending on your lumber and drawer slides clearance requirement. 


2x2 Lumber:

(4)  2x2 @ 20” long (Table base legs)

(2)  2x2 @ 20” long (Sliding table top legs) - These will need to be trimmed down the height of your caster wheels minus ¼”.  My wheels are 1-1/2”, so I’ll cut 1-1/4” off this leg measurement for a length of 18 ¾” before adding my wheels.  This allows enough clearance to prevent the table top from hitting the base.

I’m using ¾” pocket holes and 1-1/4” pocket hole screws.



Click here to watch me build the table.



Construct the front and back of the table by attaching the 5-1/2” x 27” plywood front and back pieces to the 20” legs with pocket holes and screws, keeping the plywood flush with the OUTSIDE edge of the table leg.

Attach 5-1/2” x 29-1/2” table base sides to the front and back with pocket holes and screws also keeping them flush with the outside of the legs.


   
Measure the interior of the table and cut the table bottom to this size.  After the bottom was cut, I laid my table upside down on it and traced out the portion of the table leg that overlapped the piece.  With a jig saw, I simply cut out these corners.  Drill pocket holes along each side on the underside and attach to the table.





It should be a fairly snug fit, but I chose to run a bead of caulk around the entire joint to seal it completely. I left the interior of the table open, but you could certainly add a few simple dividers using any leftover plywood and few pocket holes and screws. 





To start the sliding table top, first measure the front of the table.  This measurement, plus the required clearance for the drawer slides will be used to cut the front table top apron for the sliding top.  My table was 30” and my drawer slides each require ½” clearance, so my piece had to be 31”.  Before attaching the legs, they will need to be trimmed down the height of your caster wheels minus ¼”.  My wheels are 1-1/2”, so I’ll cut 1-1/4” off this leg measurement for a length of 18 ¾” before adding my wheels.  The total leg height WITH wheels should be 20-1/4”.  This allows enough clearance to prevent the table top from hitting the base.  Be sure to line up the plywood with the INSIDE of the table legs. 


Add ¾” pocket holes along the top to attach the table top.

For the sliding table top sides, drill pocket holes along the top and only the front edge to attach the leg, lining them up with the INSIDE of the table legs.



  



Once attached, you should have just enough clearance between the sides for your drawer slides.




Next step is the table top.  I used plywood and chose to cover the raw edges with an iron-on edge banding.  If you choose to use MDF, this step wouldn’t be necessary.        


In my video I attach the top by measuring everything, but later remembered that on the first table I built I actually just flipped the sliding top upside down and placed the table base half way inside it.  I then temporarily rested the slides between the table base sides and the sliding top sides.  I held the table top slides in place against the drawer slides and attached the top with  1-1/4” pocket screws.  Doing it this way keeps everything lined up with no measuring. 




At this point I decided to prime, paint and seal the entire table.  I used Bulls Eye 123 water based primer, Behr’s Premium Plus latex in their straight-out-of-the-can ultra pure white in a satin finish, and topped it with Minwax Polycrylic in satin.




To attach the drawer slides to the table base, I centered the slide on the table side, lining up the back edge of the slide with the back of the table. Repeat on the other side.


To attach the top, measure the length of the slide and add ¼” to that number.  My drawer slides are 27” so my measurement will be 27-1/4”  Mark that distance from the back open side of the table top towards the front and mark a line.  Rest the table top on the base, using some scrap ¼” lumber to account for the required clearance.  Slide out the drawer slide, line it up with the 27-1/4” mark and add your screws.  Continue to slowly pull the table top out to add the remaining screws.



And the table is complete!










Small Chairs

(Materials listed are for 4 chairs)


Shopping List:

3 – 2x2 @ 8’

1 – 1x3 @ 3’

3 – 1x2 @ 8’

1 – 1x12 @ 5’

1-1/4” pocket hole screws

Pocket hole plugs

Wood glue


Cutting List :

8 – 2x2 @ 21” long (back legs)

8 – 2x2 @ 11” long (front legs

4 – 1x3 @ 8” long (chair back rest)

4 – 1x2 @ 8” long (chair back rest)

8 – 1x2 @ 8” long (front and back seat supports)

16 – 1x2 @ 9” long (side seat and leg supports)


Click here to watch me build a chair


Chair Back

Drill ¾” pocket holes on each end of the back rest pieces.  Attach all back boards to the 21” back legs with glue and 1-1/4” pocket hole screws.  I used a ¼” thick wood scrap as a spacer to offset the back rest pieces from the top and front edge of the legs.  Keep the pocket holes on the backrest pieces facing the back of the chair.    I chose to fill these pocket holes using Kregs paint grade wood plugs as I knew I was going to paint the chair.  I glued the plugs in place and cut off the protruding portion once the glue was dry so it was flush with the back of the chair.


The bottom seat support should have the pocket holes facing forward so they will be hidden by the seat.






Chair Front

Join the front 11” legs with the 8” 1x2 using glue and 1-1/4” pocket hole screws.  I used my ¼” scrap lumber again to offset the piece from the front of the legs.

Join the front and back of the chair with the 9” 1x2 side aprons and bottom supports with glue and pocket hole screws.


Seat

Mark 1-1/2” from the top and each side of the seat and cut out each corner to accommodate the back chair legs.    I used my band saw, but a jig saw or small hand saw would also work.


Before attaching the seat, I chose to paint the chair and stain the seat for some contrast.  Like the table, I primed, painted & sealed.  For the seat, I stained in Minwax Jacobean and sealed it with Minwax Wipe on Poly in a satin finish.



Attach the seat to chair from the underside with small corner brackets and 5/8” screws. 







Done!  Only 3 more to go.






Now, about that giveaway! 
We've teamed up with @RyobiPowerTools and @PaintWIZ_ Paint Sprayers to bring you a prize pack valued at over $300!  Have you seen Ryobi's new One+ 18v Brushless Hammer Drill/Driver Kit in stores yet?  I bet you haven't because these haven't even hit the shelves yet.  How about Fuji Spray's DIY turbine paint sprayer called the PaintWIZ?  We've got that too!  US and Canadian residents only please*

To enter to win the giveaway, repost the 13 Days of Woodworker Christmas Image to your Instagram feed with the tag #13DaysofWoodworking.  Want additional entries?  Each day a different blogger "unwraps" their project they'll post a teaser image on their Instagram feed.  Follow their account (and check out their project!) and repost their teaser image to your Instagram feed with the same tag #13DaysofWoodworking along with the unique tag that's will be given out along with each project.  We are giving you 14 different chances to win this awesome gift pack!  You have until 10:00pm PST on December 14th to enter.  All entries will be tallied and a winner will be announced Friday, December 16th.

My "unique tag" for the extra bonus entry specific to my project is #legochristmas

Good luck and thanks again for stopping by!!

Cristina